PTFE Automatic Moulding Machine, Flange Making Machine
Characteristics of PTFE Molding Machine
Molding Machines are divided into manual, semi-automatic and fully
automatic molding machines. Through continuous improvement of the
molding press technology, the equipment is more intelligent, more
stable, and more efficient.
The intelligent automatic type is controlled by PLC system, to set
the pressure, range, speed, quantity, and dwell time, and the
operation is simple.
With diverse design, the equipment can meet the different needs of
users, and be customized for customers.
The equipment runs stably for a long time, with lower noise. And
reduces costs by saving power and energy during pressure
maintenance.
Equipment and molds are made by special technology, corrosion
resistance, durable and with long service life.
The equipment design is simple and takes up little space.
Molding products have superior performance in terms of density and
tensile strength with no flash, no burrs.
Fully automatic moulding machine, automatic powder suction,alarm
when powder out ,and counting.
Fast molding speed with no powder flying out, save raw material. .
Molding is divided into pressing methods from top to bottom, bottom
to top and simultaneous double-sided pressing.
Molding process can directly mold the customer’s desired shape,
saving manufacturing procedure, material and process cycle.
Granulating material, self-flowing powder, non-self-flowing powder
can be used in molding machine.
Some common application scenarios include:
Manufacturing industry: PTFE Automatic Moulding Machines are often
used in the manufacturing of PTFE products such as gaskets, seals,
O-rings, valve seats, bushings, and other custom-made components.
These machines can produce high-quality and precise PTFE parts in
large quantities.
Chemical industry: PTFE is known for its excellent chemical
resistance, making it suitable for applications in the chemical
industry. PTFE Automatic Moulding Machines can be used to produce
chemical-resistant equipment such as pumps, valves, and pipes.
Electrical industry: PTFE is widely used in the electrical industry
due to its excellent insulating properties. PTFE Automatic Moulding
Machines can manufacture insulators, connectors, wire coatings, and
other electrical components with high precision.
Medical industry: PTFE is biocompatible, chemically inert, and
non-toxic, making it suitable for various medical applications.
PTFE Automatic Moulding Machines can produce medical-grade
components like implants, surgical instruments, catheters, and
seals for medical devices.
Aerospace industry: PTFE is used in aerospace applications where
low friction, high temperature resistance, and chemical resistance
are required. PTFE Automatic Moulding Machines can fabricate
aerospace components like bearings, seals, insulators, and various
other parts.
Automotive industry: PTFE Automatic Moulding Machines are used to
produce PTFE components that improve the performance and longevity
of automotive systems. Examples include gaskets, seals, bearings,
bushings, and fuel system components.
Equipment Operating Environment Requirements
The ground of the site is required to be level, and the site load
is not less than the design requirements.
The operating platform needs clean space to reduce dust ingress. It
is best to have ventilation ducts in the workshop to facilitate
ventilation.
Industrial power standard 380V 50Hz 3P, voltage can be customized
according to user needs.
The factory is equipped with power distribution cabinets,
compressed air and other supporting equipment.
The room temperature of the plant should be no more than 28 ° C.
Machine Type | SUKO-3T-01 | SUKO-20T-05 | SUKO-60T-05 | HGB-70 | PBM-180 | SAP-200 | Customerize |
Pressure(T) | 3T | 20T-45T | 60T-95T | 10T | 60 T | 80T | 10-5000T |
Power(KW) | 1.5 | 4 | 5.5 | 2.7 | 5.2 | 7.2 | – |
OD Range Φ | 10-35 | 35-100 | 60-180 | 10-50 | 110 | 250 | 1-2500 |
Thk Range(mm) | ≤12 | ≤12 | ≤15 | 2-6 | ≤110 | ≤10 | 3-100 |
Output | 540 | 240-300 | 240-300 | 750-1500 | 300-1500 | 300-600 | – |
Weight(KG) | 500 | 1300 | 2100 | 1100 | 1050 | 1500 | – |
Area(m2) | 1.5 | 1.8 | 2.3 | 1.6 | 1.2 | 1.2 | – |
Equipment And mold Maintenance
Regularly check the height, cleanliness and temperature of the
hydraulic oil.
It is recommended to replace the hydraulic oil every six months.
Replaced worn seals timely.
The mold should be cleaned and maintained in time, and the surface
should be coated with a thin layer of protective oil.
